Three into one: Triaxial Accelerometers

Ingram extends lead in BTCC standings after a hard-fought victory at Donington Park
30th April 2018
We are Made in Britain!
13th September 2018

Three into one: Triaxial Accelerometers

Most industrial vibration sensors measure vibration in a single axis. Although this is an effective solution in many applications, such as when monitoring wear, imbalance or misalignment in motors, fans or pumps, it can be a challenge when more complex measurements are required in multiple axes.

One option of course is to install multiple accelerometers, one for each of the axis that need to be monitored. This can, however, be a complicated approach, as the outputs from each sensor will then need to be combined in phase to produce a meaningful assessment of the conditions of the machine being monitored. Clearly, the more complex the analysis of data, the greater the risk of error. Additionally, if space is restricted, then fitting three separate units may be impractical.

A more effective option is to use specialised triaxial accelerometers, such as our HS-172, HS-173 and HS-173R industrial sensors. These devices are compact and lightweight and are capable of simultaneously measuring vibration in two or three axes, providing a single integrated output for quick and accurate phase analysis.

Triaxial accelerometers such as these typically have an operating sensitivity of 100mV/g, a transverse sensitivity of less than 5 percent and excellent frequency response of 6 Hz to 6 kHz. Although triaxial accelerometers need to be installed and mounted with care – in exactly the same way as all industrial accelerometers – to ensure that results are accurate and consistent, they offer an ideal solution for applications where multi-axis vibration measurement is required.

For more information on triaxial accelerometers view our product page. Or for more information on our products in general, as well as applications and industries please don’t hesitate to get in touch.

Comments are closed.