HS-AS
Quick Fit Studs
- Various threads
- Enables the sensor to be connected to the mounting face
HS-AS001 , HS-AS002 , HS-AS003 , HS-AS004 , HS-AS007 , HS-AS010 , HS-AS011 , HS-AS012 , HS-AS013 , HS-AS018 , HS-AS-033 , HS-AS034 , HS-AS037 , HS-AS041 , HS-AS049 , HS-AS064 , HS-AS065 , HS-AS072 , HS-AS078 , HS-AS108 , HS-AS120
HS-AS
Adhesive Mounting Studs
- Various threads
- Adhesive mounting pads are designed to provide a stronger glue surface to connect an accelerometer to the machine.
- Fitting instructions for Adhesive mounting pads
HS-AS014 , HS-AS019 , HS-AS027 , HS-AS029 , HS-AS036 , HS-AS059 , HS-AS087
HS-AS
Adapter Studs
- Various threads
- Adapters to connect accelerometers to machine faces
HS-AS103 , HS-AS006 , HS-AS009 , HS-AS026 , HS-AS028 , HS-AS030 , HS-AS032 , HS-AS039 , HS-AS045 , HS-AS088 , HS-AS092 , HS-AS111 , HS-AS119 , HS-AS121
HS-AS
Isolation Studs
- Various threads
- Provides a barrier to cut down on electrical interference
- Fitting instructions for Isolation studs
HS-AS046 , HS-AS051
HS-AS
Grub Screw Studs
- Various threads
- Screw studs for use to adapt a female thread into a male thread
HS-AS008 , HS-AS020 , HS-AS021 , HS-AS022 , HS-AS023 , HS-AS024 , HS-AS025 , HS-AS043 , HS-AS053 , HS-AS076 , HS-AS081 , HS-AS083 , HS-AS084 , HS-AS086 , HS-AS090 , HS-AS101 , HS-AS102 , HS-AS104 , HS-AS110 , HS-AS112 , HS-AS115 , HS-AS122 , HS-AS208
HS-AS
Fin Mount Studs
- Various threads
- For use in the fins of an electric motor
HS-AS040 , HS-AS105
HS-AS
Conical Mount Studs
- Various threads
- For use with motor with existing conical mount
- HS-AS031 drawing
HS-AS031
HS-AS
Bolt Studs
- Various threads
- For use with side entry accelerometers to provide a male thread
HS-AS042 , HS-AS098 , HS-AS109 , HS-AS114 , HS-AS129
HS-AS014-44
Glue Face Stud for use with Triaxials
HS-AS221/222
Triaxial Alignment Adaptor and Mounting Stud
- HS-AS221/222 Triaxial Alignment adaptor and quick release triaxial mounting stud
- For use with HS-173R Triaxial Accelerometer
HS-AS031-M8-M-Ext
Conical Extension Mount
- Conical mount extension can be screwed into each other to built up the required length.
- Conical adapter provides a flat sensor mounting option for any of our vibration sensors series.
HS-M8 Mounting Block
Triaxial Mounting Block, 4 x 1/4″-28 UNF Female Mounting Points, 2 x M6 Fixing Points
